Serviio Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
<note important>This guide assumes you've installed a fresh (default) installation of Ubuntu 12.04.5 and assumes you have two storage devices - one for the OS and one for your media. I choose Ubuntu 12.04.5 as newer versions of Ubuntu (at the time of writing this) have some nasty VNC and SAMBA bugs (personally, I hate workarounds).</note>

<note warning>
NOTE: If you plan on using SAMBA to share media you need to be aware of some SAMBA bugs in Ubuntu 12.04.5. If you set your NIC(s) to use a static IP address SAMBA will not function properly. Use a DHCP reservation (via router) instead.</note>

Tested and working without any issues, log warnings, etc. with Serviio 1.5.
When entering commands, change <username> to whatever usename you have (but not root!).

Let's get started...

#openssh-server install, run this in terminal via GUI
<code>sudo apt-get install openssh-server</code>

#bandwidth tracking application (to be responsible about ISP usage):
#run through terminal every once in a while to see bandwidth usage and realtime traffic
<code>sudo apt-get install vnstat iftop</code>

#base codec install - installs dependancies used in ffmpeg and x264:
<code>apt-get install dcraw libfaac-dev libjack-jackd2-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libsdl1.2-dev libtheora-dev libva-dev libvdpau-dev libvorbis-dev libx11-dev libxfixes-dev texi2html zlib1g-dev libssl1.0.0 libssl-dev libxvidcore-dev libxvidcore4 libass-dev librtmp-dev</code>

<note warning>Installing newer git obtainable versions of ffmpeg break Serviio's transcoding functions (cause stuttering, player disconnections, poor quality video, etc.).</note>

#custom serviio version of ffmpeg install (compiled by me), always use Petr's (Serviio developer) customized version of ffmpeg to ensure proper serviio function:
<code>cd /tmp
wget http://webclaw.info/downloads/serviio-1.5/ffmpeg_201502201629-git-1_amd64.deb
wget http://webclaw.info/downloads/serviio-1.5/x264_0.144.2525+git40bb568-1_amd64.deb
wget http://webclaw.info/downloads/serviio-1.5/rtmpdump_201502201618-git-1_amd64.deb</code>

#install the custom serviio packages:
<code>sudo dpkg -i ffmpeg_201502201629-git-1_amd64.deb
sudo dpkg -i x264_0.144.2525+git40bb568-1_amd64.deb
sudo dpkg -i rtmpdump_201502201618-git-1_amd64.deb
</code>

#java 8 install:
<code>sudo add-apt-repository ppa:webupd8team/java
sudo apt-get update
sudo apt-get install oracle-java8-installer
</code>

#serviio 1.5 download:
<code>wget http://download.serviio.org/releases/serviio-1.5.1-linux.tar.gz
tar xzf serviio-1.5-linux.tar.gz</code>

#we keep everything neat and organized on our user profile directory:
<code>mkdir /home/<username>/Programs
cp -r serviio-1.5.1 /home/<username>/Programs</code>

#make serviio start automatically after network is active:
<code>sudo nano /etc/init/serviio.conf</code>

#add startup script:
<code>start on started networking
script
/home/<username>/Programs/serviio-1.5.1/bin/serviio.sh
end script
</code>

#latest sabnzbd install
<code>sudo add-apt-repository ppa:jcfp/ppa
sudo apt-get update
sudo apt-get install sabnzbdplus<code>

#edit sabnzbd configuration:
<code>sudo nano /etc/default/sabnzbdplus</code>

#add proper configuration:
<code>USER=<username>
HOST=0.0.0.0
</code>

#Couchpotato installation:
<code>cd /home/<username>/Programs
sudo apt-get install git
git clone https://github.com/RuudBurger/CouchPotatoServer.git
sudo cp /home/<username>/Programs/CouchPotatoServer/init/ubuntu.default /etc/default/couchpotato</code>

#setup couchpotato default config:
<code>sudo nano /etc/default/couchpotato
CP_USER=<username>
CP_HOME=/home/<username>/Programs/CouchPotatoServer</code>

#make couchpotato start when user logs into the system:
<code>sudo ln -s /home/<username>/Programs/CouchPotatoServer/init/ubuntu /etc/init.d/couchpotato
sudo update-rc.d couchpotato defaults</code>

#SickRage installation - I suggest using dev version once installed (supports more indexers):
<code>git clone git://github.com/echel0n/SickRage.git</code>

#setup sickbeard default config:
<code>sudo nano /etc/default/sickbeard
SB_USER=<username>
SB_HOME=/home/<username>/Programs/SickRage</code>

#make sickrage start when user logs into the system
<code>sudo ln -s /home/<username>/Programs/SickRage/init.ubuntu /etc/init.d/sickbeard
sudo update-rc.d sickbeard defaults</code>

#create media storage using gparted (aligns disk correctly, Ubuntu 12.04.5 native Disk utility does not):
<note important>Disks which are not aligned properly perform very poorly and can cause Serviio to stutter / jitter when transcoding!</note>
<code>sudo apt-get install gparted</code>

#select your disk (eg: sdb) can create a partition table, format as ext4:
#now let's mount the new storage:
<code>sudo mkdir /media/storage</code>

#automatically mount storage after a reboot:
<code>sudo nano -Bw /etc/fstab
/dev/sdb1       /media/storage  ext4    defaults        0       2
</code>

#remount the storage so we can take ownership:
<code>sudo mount -a
sudo chown -R <username>:<username> /media/storage</code>

#reboot to make our changes effective:
<code>sudo reboot -n</code>

Create directories on storage as required (you can do this via the GUI) on /media/storage/
> data > movies
> data > television
transcoding
downloads
downloads > completed
> downloads > movies
> downloads > television

<note important>Downloads go into downloads folder and once complete the applicable sudirectory (by sabNZBd) then are post-processed / moved to "data > movies" or "data > television"</note>

#run the Serviio console to define what media is to be shared and set transcoding directory:
#defemine media storage location as the transcoding dump for Serviio hence the transcoding directory (eg: /media/storage/trancoding)
<code>
cd /home/<username>/Programs/serviio-1.5/bin
sudo ./serviio-console.sh
</code>

Via GUI and enable file sharing (right click on directory) - you'll be asked to install 2 packages (samba and libpasswd - an automatic process), just click install. I would enable guest access (but not RW access) other other players that don't require transcoding can play video (eg: KODI).

#reboot is required for shares to work.
<code>sudo reboot -n</code>

#if not done already, enable port forwarding (your router) as follows:
#crappy routers additionally require you turn on UPNP and enable IPv4 multicast support.
MediaBrowser: <LAN-IP>:23424 (UDP + TCP)
SickRage: <LAN-IP>:8081 (TCP)
sabNZBd: <LAN-IP>:8080 (TCP)
Couchpotato: <LAN-IP>:5050 (TCP)

LAN computers can access your shares via:
Windows: \\<LAN-IP> or \\<MACHINENAME>
Linux / Mac OS: smb://<LAN-IP> or smb://<MACHINENAME>

If you want to access services outside your LAN I strongly suggest using SSL.
Serviio Wiki

User Tools

Site Tools

Page Tools
