This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
install_qnap [2011/12/24 00:54] cerberus |
install_qnap [2012/02/25 17:57] cerberus |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== 1 The Easy Way ====== | ====== 1 The Easy Way ====== | ||
- | 1. Install | + | 1. Locate |
- | 2. Download | + | |
- | ARM x19: [[http:// | + | 2. Download and install the JRE 6 QPKG for ARM or x86 from the link provided below. |
- | x86: [[http:// | + | |
+ | ARM x19: [[http:// | ||
+ | x86: [[http:// | ||
- | ====== 2 The Hard Way ====== | + | 3. Once installed, enable it from the admin backend and that's it. You can now run any types of Java apps on your NAS now but expect the performance degrades as it is NAS and not a server/pc. |
- | Thought I should write down my success (i think now atleast) story too and maybe i will help someone out. | + | 4. Download |
- | Note: If you get some problems I am fairly sure I wont be able to help you out since everything feels sorta unstable once you reboot, the smallest error and nothing will work after bootup and you have to go through all config again and reboot (which takes like 5-10 minutes). | + | [[http://forum.qnap.com/ |
- | The biggest issues I had setting it up is that basically you can't change any base config in for example/ | + | ====== 2 The Hard Way ====== |
- | Anyways, what I did to get everything to run smoothly is (I might have missed a bit here and there, but bear with me): | + | < |
+ | </ | ||
- | 0. I used most of the synology guide at [[http://pcloadletter.co.uk/2011/ | + | The biggest issues is that basically you can't change any base config in for example/etc/init.d/ folders and whatnot, cause the QNAP NAS will overwrite most of it with its built-in settings (probably wise to avoid support issues where people have bricked their NAS or something by scewing up the OS ) |
1. Start by installing IPKG Optware from the appliaction services/ | 1. Start by installing IPKG Optware from the appliaction services/ | ||
Line 30: | Line 31: | ||
mkdir /opt/tmp | mkdir /opt/tmp | ||
| | ||
- | 5. From [[http:// | + | 5. From [[http:// |
6. Put the file somewhere on your NAS and copy it to the temp folder | 6. Put the file somewhere on your NAS and copy it to the temp folder | ||
- | cp / | + | cp / |
| | ||
7. Download some required files in this new folder | 7. Download some required files in this new folder |